General
|
| Number of amplifier channels |
2 |
| Peak total output all channels driven |
9000 W |
| Peak output voltage per channel |
170 V |
| Max output current per channel |
70 A peak |
Max output power (all channels driven)
|
| 2 ohms |
4500 W |
| 4 ohms |
3000 W |
| 8 ohms |
1600 W |
| 16 ohms |
800 W |
Max output power bridged
|
| 2 ohms |
Not recommended 1 |
| 4 ohms |
9000 W |
| 8 ohms |
6000 W |
| 16 ohms |
3200 W |
Performance
|
| THD 20 Hz – 20 kHz at 1 W |
<0.1% |
| THD at 1 kHz and 1 dB below clipping |
<0.05% |
| Signal to Noise Ratio |
>112 dBA |
| Channel separation (Crosstalk) at 1 kHz |
>70 dB |
| Input impedance |
20 kOhm |
| Output impedance @ 100 Hz |
19 mOhm |
Gain, Sensitivity and Limiters
|
| VPL, selectable per ch |
170, 140, 116, 100, 80, 66, 54 V |
| VPL, when bridged 2 |
340, 280, 232, 200, 160, 132, 108 V |
| Voltage Peak Limiter mode (per ch.) |
Hard / Soft |
| Amplifier gain selectable (all channels) – rear-panel switches 2 |
23, 26, 29, 32, 35, 38, 41, 44 dB |
| Default gain |
38 dB |
| Level adjustment (per channel) |
Front-panel potentiometer, 31 position detented from -inf to |
Connectors and Buttons
|
| Input connectors (per ch.) |
3-pin XLR, electronically balanced |
| Output connectors (per ch.) |
Neutrik speakON / binding post |
| Output bridge mode |
A+B – Ch. A is signal input source. A+B, C+D – Ch.’s A and C are input source |
| NomadLink network |
On board, 2 x RJ45 connectors IN and OUT |
| Intelligent fans (on/off) |
Yes, depending on presence of output signal |
| Power on/off and Remote enable on/off |
Individual switches on front-panel |
| Cooling |
Dual fan, front to rear airflow, no filter required, temperature controlled speed |
Front-panel user interface
|
| Common |
NomadLink Network; Power Average Limiter (PAL)4; Power on |
| Per channel |
Signal present / High-impedance; -10 dB and -4 dB output signal;Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute |
Power
|
| Operating voltage, 230 V / 115 V nominal 3 |
130-265 V / 65 -135 V |
| Minimum power-up voltage, 230 V / 115 V |
171 V / 85 V |
| Power Average Limiter (PAL) 4 |
Yes |
| Soft-start / Inrush Current Draw |
Yes / max. 5 A |
| Mains connector |
230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock |
Dimensions
|
| Dimensions |
W: 483 mm (19”), H: 88 mm (2 U), D: 396 mm (15.6”) |
| Weight |
| Weight |
12 kg (26.4 lbs) |
| Finish |
| Finish |
Black painted steel chassis with black painted steel / aluminum front |
