Catégorie : Non classé

SD11 : Specifications

General Specifications

• Faders 12 x 100mm touch-sensitive, motorised
• Screens 1 x 15” (38cm) LCD high – resolution touch screen
• Meters 12 x 8-segment LED bargraph
• Input Channels 48
• Busses 24 + LR or LCR master
• Solo busses 2 stereo busses
• Matrix 8 x 8 matrix (additional to busses above)
• Control Groups 8, selectable for VCA-style, Moving fader, Mute Group
• Graphic Eq 12 x 32-band, Gain +/- 12dB
• Internal FX 6
• Local I/O 16 x mic/line on, 8 Line out, 2x AES/EBU I/O (mono)
• MADI interface 1 x 75 ohm BNC connectivity
• D-Rack interface 1 x RJ45 shielded connectivity
• MIDI interface In / Out / Through
• VGA port DB-15 mini-female (1024 x 768 resolution)
• USB ports (3) USB2
• Light connection (1) XLR3 1.2 – 12V
• Ext Sync Word clock, MADI
• Headphone TRS unbalanced / 8-600 ohms 1/4 inch Jack
• GPI 2 x 1/4 inch Jack
• GPO 2 x 1/4 inch Jack

Physical

• SD11 Dimensions 483mm/19inch (w) x 577mm/22.7inch (d) x 232mm/9.1inch (h)
• SD11 Weight 24Kg (53lbs)
• D-Rack 412mm/16.22inch (w) x 312mm/12.3inch (d) x 179mm/7inch (h)
• D-Rack Weight 7.4Kg (16lbs)

Audio Specification

• Sample Rate: 48kHz, 44.1kHz or 96kHz
• Processing Delay: 2ms Typical @ 48k (60 Stereo Channels, Stage Input Through L-R Buss to Stage Output) 1.1ms @ 96k
• Internal Processing: Up to 40-bit, Floating Point
• A>D & D>A: 24-bit Converter Bit Depth
• Frequency Response: +/- 0.6dB (20Hz – 20kHz)
• THD: <0.05% @ Unity Gain,: 10dB Input @ 1kHz
• Channel Seperation: Better Than 90dB: (40Hz – 15kHz)
• Residual Output: <90dBu Typical
• Noise: (20Hz – 20kHz)
• Microphone Input: Better Than -126dB: Equivalent Noise
• Maximum Output Level: +22dBu
• Maximum Input Level: +22dBu

Processing Channel Specification
Input Channel

• Name: User-Defined / Presets
• Channel Selection: Mono / Stereo / Multi
• Input Routing: Main & Alternate Input
• Analogue Gain: -20 to +60dB
• Phase: Normal / Reverse
• Digital Trim: -40 to +40dB
• Delay: >1 Sec (Coarse & Fine Control)
• DiGiTuBe: Drive 0.01 – 50.0
• Bias 0 – 6
• LPF: 20 – 20kHz, 24dB/Oct
• HPF: 20 – 20kHz, 24dB/Oct
• Insert A: (Pre EQ/Dyn) On/Off
• Equalisation: 4 Band EQ: Parametric or Dynamic (Low/Lowshelf, Lower-Mid/Lowshelf, Upper-Mid/
  Hi Shelf, Hi/Hishelf)
  On/Off
  Freq; 20 – 20kHz
  Gain; +/- 18dB
  Q: 0.1 -20 (Parametric) / 0.10-0.85 (Shelf)
  Dynamic EQ On/Off
  Over/Under
  Band On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1

SD9 : Specifications

General Specifications

• Faders:: 24 x 100mm Touch-sensitive, motorised
• Screens:: 1 x 15” (38cm) LCD high – resolution touch screen
• Meters:: 24 x 8-Segment LED bargraph
• Input Channels:: 96 Input Channels
• 48 Aux/ Sub-Group Busses
• Solo Busses: 2 Stereo Busses
• Matrix: 12 x 8 Matrix (additional to busses above)
• Control Groups: 12, Selectable for VCA-style, Moving Fader, Mute Group
• Graphic EQ: 16 x 32-band, Gain +/- 12dB
• Internal FX: 12 Stereo FX Processors
• Local I/O: 8 x Mic/Line I/O, 4 x AES/EBU: I/O (Mono)
• MADI Interface: In / Out /
• Optional Optics
• MIDI Interface: In / Out / Thru
• VGA Port: DB-15 Mini-Female (1024 x 768 Resolution)
• USB Ports (3): USB 2
• Light Connection (2): XLR3 1.2 – 12V
• Ext Sync: Word Clock, MADI
• Headphone: TRS Unbalanced / 8-600 Ohms 1/4 Inch Jack
• GPI: 2 x 1/4” Jack TF
• GPO: 2 x 1/4” Jack TF
• SD9 Dimensions: 878mm (w) x 785mm (d) x 262mm (h)
• SD9 Weight: 36Kg (105Kg with optional flightcase)
• SD9 Flightcase: 1063mm (w) x 1131mm (h) x 472mm (d) (Optional):
• SD9 Power: 90-264 VAC, 47-63Hz Auto Sensing. 208 watts, 232VA Requirements
• Redundancy: Internal PSU x 2 (Optional)

Audio Specification

• Sample Rate: 48kHz or 96kHz
• Processing Delay: 2ms Typical @ 48k (48 Stereo Channels, Stage Input Through L-R Buss to Stage Output) 1.1ms @ 96k
• Internal Processing: Up to 40-bit, Floating Point
• A>D & D>A: 24-bit Converter Bit Depth
• Frequency Response: +/- 0.6dB (20Hz – 20kHz)
• THD: <0.05% @ Unity Gain,: 10dB Input @ 1kHz
• Channel Seperation: Better Than 90dB: (40Hz – 15kHz)
• Residual Output: <90dBu Typical
• Noise: (20Hz – 20kHz)
• Microphone Input: Better Than -126dB: Equivalent Noise
• Maximum Output Level: +22dBu
• Maximum Input Level: +22dBu

Processing Channel Specification
Input Channel

• Name: User-Defined / Presets
• Channel Selection: Mono / Stereo / Multi
• Input Routing: Main & Alternate Input
• Analogue Gain: -20 to +60dB
• Phase: Normal / Reverse
• Digital Trim: -40 to +40dB
• Delay: >1 Sec (Coarse & Fine Control)
• DiGiTuBe: Drive 0.01 – 50.0
• Bias 0 – 6
• LPF: 20 – 20kHz, 24dB/Oct
• HPF: 20 – 20kHz, 24dB/Oct
• Insert A: (Pre EQ/Dyn) On/Off
• Equalisation: 4 Band EQ: Parametric or Dynamic (Low/Lowshelf, Lower-Mid/Lowshelf, Upper-Mid/
  Hi Shelf, Hi/Hishelf)
  On/Off
  Freq; 20 – 20kHz
  Gain; +/- 18dB
  Q: 0.1 -20 (Parametric) / 0.10-0.85 (Shelf)
  Dynamic EQ On/Off
  Over/Under
  Band On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
• Dynamics 1: Single or Multiband (3-Band)
  Compressor: On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
  Gain; 0 to +40dB with
  Autogain Option
  Link; Any Channel/Buss
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  Knee : Hard, Med, Soft
  De-Esser: Threshold : 20us – 20ms
  Release : 1ms – 100ms
  Ratio : 1:1 – 50:1
  Ess-Band : Listen On/Off
  Ess-Band Filter Freq / Width: 20Hz – 20kHz
• Dynamics 2: On/Off
  Gate / Ducker: Threshold; -60 – 0dB
  Attack; 50us – 100ms
  Hold; 2ms – 2s
  Release; 5ms – 5s
  Range; 0 – 90dB
  Key; Any Source
  Key Listen
  Freq/Width; 20 – 20kHz
  Compressor: On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
  Gain; 0 to +40dB with
  Autogain Option
  Link; Any Channel / Buss
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  S/C Source : Any Source
  S/C Listen : On/Off
  S/C Filter Freq/Width: 20Hz – 20kHz
• Insert B: (Post EQ/Dyn) On/Off
• EQ/Dyn order: EQ/Dyn or Dyn/EQ
• Mute: Channel Mute / Hard Mute
• Solo: Solo Buss 1 / Solo Buss 2 / Both, Auto Solo
• Channel Safe: Input, EQ, Dyn, Aux, Pan, Fade/Mute, Inserts, Buss, Directs,
  Full Safe
• Output Routing: Buss, Insert A, Insert B, FX
  Direct: On/Off, Pre-Mute / Pre-Fade / Post-Fade, Level +/- 18dB
• Fader: 100mm Motorised Fader ∞ to +10dB

Processing Channel Specification
Aux / Group / Matrix Output

• Name: User-Defined / Presets
• Phase: Normal / Reverse
• Digital Trim: -20 to +60dB
• Delay: >1 Sec (Coarse & Fine control)
• DiGiTuBe: Drive 0.01 – 50.0
  Bias 0 – 6
• LPF: 20 – 20kHz, 24dB / Oct
• HPF: 20 – 20kHz, 24dB / Oct
• Insert A: (Pre EQ/Dyn) On/Off
• Equalisation: 4 Band Parametric or Dynamic
  : Parametric Only
  (Low/Lowshelf, Lower-Mid/Lowshelf, Upper-Mid/Hi Shelf, Hi/Hishelf)
  On/Off
  Freq; 20 – 20kHz
  Gain; +/- 18dB
  Q: 0.1 -20 (Parametric) / 0.10-0.85 (Shelf)
  Dynamic EQ On/Off
  Over/Under
  Band On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1

SD8 : Specifications

General Specifications

• Faders 37 x 100mm Touch-Sensitive, Motorised (25 on SD8-24)
• Screens 1 x 15” (38cm) LCD High – Resolution Touch Screen
• Meters 38 x 20-Segment LED Bargraph (26 on SD8-24)
• 120 Input Channels 
• Busses 48 assignable that can be configured as groups / auxillary busses + LR or LCR Master
• Solo Busses 2 Stereo Busses
• Matrix 16 x 16 Matrix (Additional to Busses Above)
• Control Groups 12, Selectable for VCA-style, Moving Fader, Mute Group
• Graphic EQ 24 x 32-band, Gain +/- 12dB
• Internal FX 16 Stereo FX Processors
• Local I/O 8 x Mic/Line I/O, 8 x AES/EBU  I/O (Mono)
• MADI Interface 2 Redundant Interfaces, 75 Ohm BNC Connectivity
• Optic Interface Optocore (Optional Factory Fit Only)
• MIDI Interface In / Out / Through
• VGA Port DB-15 Mini-Female (1024 x 768 Resolution)
• USB Ports (3) USB 2
• Light Connection (2) XLR3 1.2 – 12V
• Ext Sync Word Clock, AES, MADI, Optics
• Headphone TRS Unbalanced / 8-600 Ohms 1/4 Inch Jack
• SD8 Dimensions 1347mm (w) x 811mm (d) x 251.7mm (h)
• SD8 Weight 65Kg (155Kg with Optional Flightcase)
• SD8 Flightcase  1517mm (w) x 1133mm (h) x 452mm (d) (Optional) 
• SD8 Power Requirements 90-264 VAC, 47-63Hz Auto Sensing. 230VA Typical, 295VA Peak (Meters Full, Faders Moving
• SD8-24 Dimensions 923.5mm (w) x 811mm (d) x 251.7mm (h)
• SD8-24 Weight 50Kg (127Kg with Optional Flightcase)
• SD8-24 Flightcase  1092mm (w) x 1133mm (h) x 452mm (d) (Optional) 
• SD8-24 Power Requirements 90-264 VAC, 47-63Hz Auto Sensing. 230VA typical, 295VA Peak (Meters Full, Faders Moving)
• Redundancy Internal PSU x 2

 
Audio Specification

• Sample Rate: 48kHz, 44.1kHz or 96kHz
• Processing Delay: 2ms Typical @ 48k(60 Stereo Channels, Stage Input Through L-R Buss to Stage Output) 1.1ms @96k
• Internal Processing: Up to 40-bit, Floating Point
• A>D & D>A: 24-bit Converter Bit Depth
• Frequency Response: +/- 0.6dB (20Hz – 20kHz)
• THD: <0.05% @ Unity Gain,: 10dB Input @ 1kHz
• Channel Seperation: Better Than 90dB: (40Hz – 15kHz)
• Residual Output: <90dBu Typical
• Noise: (20Hz – 20kHz)
• Microphone Input: Better Than -126dB: Equivalent Noise
• Maximum Output Level: +22dBu
• Maximum Input Level: +22dBu

Processing Channel Specification
Input Channel

• Name: User-Defined / Presets
• Channel Selection: Mono / Stereo / Multi
• Input Routing: Main & Alternate Input
• Analogue Gain: -20 to +60dB
• Phase: Normal / Reverse
• Digital Trim: -40 to +40dB
• Delay: >1 Sec (Coarse & Fine Control)
• DiGiTuBe: Drive 0.01 – 50.0
• Bias 0 – 6
• LPF: 20 – 20kHz, 24dB/Oct
• HPF: 20 – 20kHz, 24dB/Oct
• Insert A: (Pre EQ/Dyn) On/Off
• Equalisation: 4 Band EQ: Parametric or Dynamic (Low/Lowshelf, Lower-Mid/Lowshelf, Upper-Mid/
  Hi Shelf, Hi/Hishelf)
  On/Off
  Freq; 20 – 20kHz
  Gain; +/- 18dB
  Q: 0.1 -20 (Parametric) / 0.10-0.85 (Shelf)
  Dynamic EQ On/Off
  Over/Under
  Band On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
• Dynamics 1: Single or Multiband (3-Band)
  Compressor: On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
  Gain; 0 to +40dB with
  Autogain Option
  Link; Any Channel/Buss
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  Knee : Hard, Med, Soft
  De-Esser: Threshold : 20us – 20ms
  Release : 1ms – 100ms
  Ratio : 1:1 – 50:1
  Ess-Band : Listen On/Off
  Ess-Band Filter Freq / Width: 20Hz – 20kHz
• Dynamics 2: On/Off
  Gate / Ducker: Threshold; -60 – 0dB
  Attack; 50us – 100ms
  Hold; 2ms – 2s
  Release; 5ms – 5s
  Range; 0 – 90dB
  Key; Any Source
  Key Listen
  Freq/Width; 20 – 20kHz
  Compressor: On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
  Gain; 0 to +40dB with
  Autogain Option
  Link; Any Channel / Buss
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  S/C Source : Any Source
  S/C Listen : On/Off
  S/C Filter Freq/Width: 20Hz – 20kHz
• Insert B: (Post EQ/Dyn) On/Off
• EQ/Dyn order: EQ/Dyn or Dyn/EQ
• Mute: Channel Mute / Hard Mute
• Solo: Solo Buss 1 / Solo Buss 2 / Both, Auto Solo
• Channel Safe: Input, EQ, Dyn, Aux, Pan, Fade/Mute, Inserts, Buss, Directs,
  Full Safe
• Output Routing: Buss, Insert A, Insert B, FX
  Direct: On/Off, Pre-Mute / Pre-Fade / Post-Fade, Level +/- 18dB
• Fader: 100mm Motorised Fader ∞ to +10dB

Processing Channel Specification
Aux / Group / Matrix Output

• Name: User-Defined / Presets
• Phase: Normal / Reverse
• Digital Trim: -20 to +60dB
• Delay: >1 Sec (Coarse & Fine control)
• DiGiTuBe: Drive 0.01 – 50.0
  Bias 0 – 6
• LPF: 20 – 20kHz, 24dB / Oct
• HPF: 20 – 20kHz, 24dB / Oct
• Insert A: (Pre EQ/Dyn) On/Off
• Equalisation: 4 band or Dynamic (Low/Lowshelf, Lower-Mid/Lowshelf, Upper-Mid/Hi Shelf, Hi/Hishelf)
  On/Off
  Freq; 20 – 20kHz
  Gain; +/- 18dB
  Q: 0.1 -20 (Parametric) / 0.10-0.85 (Shelf)
  Dynamic EQ On/Off
  Over/Under
  Band On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
• Dynamics 1: Single or Multiband (3-band)
  Compressor: On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
  Gain; 0 to +40dB
  with Autogain Option
  Link; Any Channel / Buss
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  Knee : Hard, Med, Soft
  De-Esser: Threshold: 20us – 20ms
  Release: 1ms – 100ms
  Ratio: 1:1 – 50:1
  Ess-Band: Listen On/Off
  Ess-Band Filter Freq/Width: 20Hz – 20kHz
• Dynamics 2: On/Off
  Gate / Ducker: Threshold; -60 – 0dB
  Attack; 50us – 100ms
  Hold; 2ms – 2s
  Release; 5ms – 5s
  Range; 0 – 90dB
  Key; Any Source
  Key Listen
  Freq/Width; 20 – 20kHz
  Compressor: On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
  Gain; 0 to +40dB
  with Autogain Option
  Link; Any Channel/Buss
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  S/C Source : Any source
  S/C Listen : On/Off
  S/C Filter Freq/Width: 20Hz – 20kHz
• Insert B: (Post EQ/Dyn) On/Off
• EQ/Dyn Order: EQ/Dyn or Dyn/EQ
• Mute: Channel Mute / Hard Mute
• Solo: Solo Buss 1 / Solo Buss 2 / Both, Auto Solo
• Channel Safe: Trim, EQ, Dyn, Fade/Mute, Inserts, Outputs, Full Safe
• Output Routing: Outputs, Insert A, Insert B, FX
• Fader: 100mm Motorised Fader ∞ to + 10dB

SD10 : Specifications

General Specifications

• Faders 37 x 100mm Touch-Sensitive, Motorised (25 on SD10T-24)
• Screens 1 x 15” (38cm) LCD High – Resolution Touch Screen
• Meters 38 x 20-Segment LED Bargraph (26 on SD10T-24)
• Input Channels 132
• Busses 56 assignable that can be configured as groups / auxiliary busses + LR or LCR Master
• Solo Busses 2 Stereo Busses
• Matrix 24 x 24 Matrix (Additional to Busses Above)
• Control Groups 24, Selectable for VCA-style, Moving Fader, Mute Group
• Graphic EQ 24 x 32-band, Gain +/- 12dB
• Internal FX 24 Stereo FX Processors
• Local I/O 8 x Mic/Line I/O, 8 x AES/EBU  I/O (Mono)
• MADI Interface 2 Redundant Interfaces, 75 Ohm BNC Connectivity
• Standard Optics
• MIDI Interface In / Out / Thru
• VGA Port DB-15 Mini-Female (1024 x 768 Resolution)
• USB Ports (3) USB 2
• Light Connection (2) XLR3 1.2 – 12V
• Ext Sync Word Clock, AES, MADI, Optics
• Headphone TRS Unbalanced / 8-600 Ohms 1/4 Inch Jack
• SD10 Dimensions 1398mm (w) x 818mm (d) x 285mm (h)
• SD10 Weight 60Kg/132lbs (175Kg/385.80lbs with Optional Flightcase)
• SD10 Flightcase  1586mm (w) x 1158mm (h) x 504mm (d) Weight 115Kg/253.53lbs (Optional)
• SD10 Power Requirements 90-264 VAC, 47-63Hz Auto Sensing.235 watts

Audio Specification

• Sample Rate: 48kHz, 44.1kHz or 96kHz
• Processing Delay: 2ms Typical @ 48k(60 Stereo Channels, Stage Input Through L-R Buss to Stage Output) 1.1ms @96k
• Internal Processing: Up to 40-bit, Floating Point
• A>D & D>A: 24-bit Converter Bit Depth
• Frequency Response: +/- 0.6dB (20Hz – 20kHz)
• THD: <0.05% @ Unity Gain,: 10dB Input @ 1kHz
• Channel Seperation: Better Than 90dB: (40Hz – 15kHz)
• Residual Output: <90dBu Typical
• Noise: (20Hz – 20kHz)
• Microphone Input: Better Than -126dB: Equivalent Noise
• Maximum Output Level: +22dBu
• Maximum Input Level: +22dBu

Processing Channel Specification
Input Channel

• Name: User-Defined / Presets
• Channel Selection: Mono / Stereo / Multi
• Input Routing: Main & Alternate Input
• Analogue Gain: -20 to +60dB
• Phase: Normal / Reverse
• Digital Trim: -40 to +40dB
• Delay: >1 Sec (Coarse & Fine Control)
• DiGiTuBe: Drive 0.01 – 50.0
• Bias 0 – 6
• LPF: 20 – 20kHz, 24dB/Oct
• HPF: 20 – 20kHz, 24dB/Oct
• Insert A: (Pre EQ/Dyn) On/Off
• Equalisation: 4 Band EQ: Parametric or Dynamic (Low/Lowshelf, Lower-Mid/Lowshelf, Upper-Mid/
  Hi Shelf, Hi/Hishelf)
  On/Off
  Freq; 20 – 20kHz
  Gain; +/- 18dB
  Q: 0.1 -20 (Parametric) / 0.10-0.85 (Shelf)
  Dynamic EQ On/Off
  Over/Under
  Band On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
• Dynamics 1: Single or Multiband (3-Band)
  Compressor: On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
  Gain; 0 to +40dB with
  Autogain Option
  Link; Any Channel/Buss
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  Knee : Hard, Med, Soft
  De-Esser: Threshold : 20us – 20ms
  Release : 1ms – 100ms
  Ratio : 1:1 – 50:1
  Ess-Band : Listen On/Off
  Ess-Band Filter Freq / Width: 20Hz – 20kHz
• Dynamics 2: On/Off
  Gate / Ducker: Threshold; -60 – 0dB
  Attack; 50us – 100ms
  Hold; 2ms – 2s
  Release; 5ms – 5s
  Range; 0 – 90dB
  Key; Any Source
  Key Listen
  Freq/Width; 20 – 20kHz
  Compressor: On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
  Gain; 0 to +40dB with
  Autogain Option
  Link; Any Channel / Buss
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  S/C Source : Any Source
  S/C Listen : On/Off
  S/C Filter Freq/Width: 20Hz – 20kHz
• Insert B: (Post EQ/Dyn) On/Off
• EQ/Dyn order: EQ/Dyn or Dyn/EQ
• Mute: Channel Mute / Hard Mute
• Solo: Solo Buss 1 / Solo Buss 2 / Both, Auto Solo
• Channel Safe: Input, EQ, Dyn, Aux, Pan, Fade/Mute, Inserts, Buss, Directs,
  Full Safe
• Output Routing: Buss, Insert A, Insert B, FX
  Direct: On/Off, Pre-Mute / Pre-Fade / Post-Fade, Level +/- 18dB
• Fader: 100mm Motorised Fader ∞ to +10dB

Processing Channel Specification
Aux / Group / Matrix Output

• Name: User-Defined / Presets
• Phase: Normal / Reverse
• Digital Trim: -20 to +60dB
• Delay: >1 Sec (Coarse & Fine control)
• DiGiTuBe: Drive 0.01 – 50.0
  Bias 0 – 6
• LPF: 20 – 20kHz, 24dB / Oct
• HPF: 20 – 20kHz, 24dB / Oct
• Insert A: (Pre EQ/Dyn) On/Off
• Equalisation: 8 Band EQ: 4 band Parametric and 4 band parametric or Dynamic (Low/Lowshelf, Lower-Mid/Lowshelf, Upper-Mid/Hi Shelf, Hi/Hishelf)
  On/Off
  Freq; 20 – 20kHz
  Gain; +/- 18dB
  Q: 0.1 -20 (Parametric) / 0.10-0.85 (Shelf)
  Dynamic EQ On/Off
  Over/Under
  Band On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
• Dynamics 1: Single or Multiband (3-band)
  Compressor: On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
  Gain; 0 to +40dB
  with Autogain Option
  Link; Any Channel / Buss
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  Knee : Hard, Med, Soft
  De-Esser: Threshold: 20us – 20ms
  Release: 1ms – 100ms
  Ratio: 1:1 – 50:1
  Ess-Band: Listen On/Off
  Ess-Band Filter Freq/Width: 20Hz – 20kHz
• Dynamics 2: On/Off
  Gate / Ducker: Threshold; -60 – 0dB
  Attack; 50us – 100ms
  Hold; 2ms – 2s
  Release; 5ms – 5s
  Range; 0 – 90dB
  Key; Any Source
  Key Listen
  Freq/Width; 20 – 20kHz
  Compressor: On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
  Gain; 0 to +40dB
  with Autogain Option
  Link; Any Channel/Buss
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  S/C Source : Any source
  S/C Listen : On/Off
  S/C Filter Freq/Width: 20Hz – 20kHz
• Insert B: (Post EQ/Dyn) On/Off
• EQ/Dyn Order: EQ/Dyn or Dyn/EQ
• Mute: Channel Mute / Hard Mute
• Solo: Solo Buss 1 / Solo Buss 2 / Both, Auto Solo
• Channel Safe: Trim, EQ, Dyn, Fade/Mute, Inserts, Outputs, Full Safe
• Output Routing: Outputs, Insert A, Insert B, FX
• Fader: 100mm Motorised Fader ∞ to + 10dB

S31 : Specifications

General Specifications

• 46 busses: 16 x flexi-busses Mono/Stereo (equivalent of 32 DSP busses), Stereo Master (2), Solo busses (2 stereo, 4 total), and 10 x 8 Matrix (8)
• 10 x Control Groups
• 1 x Compressor per channel and buss
• 1 x Gate per channel and buss (switchable to ducker, or compressor with side chain access)
• 16 x assignable 32 band Graphic EQs
• 8 x FX engines (reverbs, delays, w/modulation and enhancer)
• 4 x assignable DiGiTuBes
• 4 x assignable Multiband Comps
• User definable Macros
• An extremely high power headphone amplifier with 1/4 inch and mini jack socket
• 96kHz as standard
• 24 mic line inputs
• 12 analogue outs
• 2 AES I/O (mono)
• Word Clock I/O
• 1 GPI and 1 GPO
• DVI out (for an external monitor)
• 2 DMI Card slots (up to 64 I/O per slot)
• 2 Ethernet connections for Networking
• 2 x 24 segment master/solo meters
• Touch sensitive rotaries with integrated switch & HTL
• 3 x multi-touch screens
• 31 x touch sensitive moving faders
• 4 x layers of banks of 10 faders
• Customisable bank and channel layout
• Snapshots
• Integrated USB2 Audio I/O interface for recording and playback of up to 48 channels 40 x Input flex-channels Mono/Stereo (equivalent of 80 DSP channels)

 

Audio Specification

• Sample Rate 48kHz, 96kHz
• Processing Delay 2ms Typical @ 48k(60 Stereo Channels, Stage
• Input Through L-R Buss to Stage Output) 1.1ms @ 96kHz
• Internal Processing Up to 40-bit, Floating Point
• A>D & D>A 24-bit Converter Bit Depth
• Frequency Response +/- 0.6dB (20Hz – 20kHz)
• THD <0.05% @ Unity Gain, 10dB Input @ 1kHz
• Channel Seperation Better Than 90dB (40Hz – 15kHz)
• Residual Output <90dBu Typical
• Noise (20Hz – 20kHz)
• Microphone Input Better Than -126dB Equivalent Noise
• Maximum Output Level +22dBu
• Maximum Input Level +22dBu

 

Processing Channel Specification
Input Channel

• Input Name User-Defined
• Channel Selection Mono / Stereo
• Input Routing Main Input
• Analogue Gain -20 to +60dB
• Phase Normal / Reverse
• Digital Trim 40 to +40dB
• Delay 0 – 682ms
• DiGiTuBe Drive 0.01 – 50.0
• Bias 0 – 6
• LPF 20 – 20kHz, 24dB/Oct
• HPF 20 – 20kHz, 24dB/Oct
• Insert A (Pre EQ/Dyn) On/Off
• Equalisation 4 Band EQ: Parametric or Dynamic (Low/Lowshelf, Lower-Mid/Lowshelf, Upper-Mid/
  Hishelf, Hi/Hishelf)
  On/Off
  Freq; 20 – 20kHz
  Gain; +/- 18dB
  Q: 0.1 -20 (Parametric) / 0.10-0.90 (Shelf)
• Dynamics 1 Single or 4 x Multiband (3-Band)
  Compressor On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 5ms – 5s
  Ratio; 1:1 – 50:1
  Gain; 0 to +40dB
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  Knee : Hard, Med, Soft
• Dynamics 2 On/Off
  Gate / Ducker Threshold; -60 – 0dB
  Attack; 50us – 100ms
  Hold; 2ms – 2s
  Release; 5ms – 5s
  Range; 0 – 90dB
  Key; Any Source
  Key Listen
  Freq/Width; 20 – 20kHz
  Compressor On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 5ms – 5s
  Ratio; 1:1 – 50:1
  Gain; 0 to +40dB
  Link; Any Channel / Buss
  S/C Source : Any Source
  S/C Listen : On/Off
  S/C Filter Freq/Width: 20Hz – 20kHz
• Insert B (Post EQ/Dyn) On/Off
• Mute Channel Mute
• Solo Solo Buss 1 / Solo Buss 2 / Both,
• Channel Safe Socket Properties, Input Route, Mono/Stereo, Label, Filters, Trim, Delay, Tube, Insert A, EQ, Dyn1, Dyn2, Insert B, Aux, Group Assigns, Pan, Fade, Mute, Direct Outs, Full Safe
• Output Routing Buss,
• Insert A, Insert B,
• Direct: Post-Fade
• Fader 100mm Motorised Fader ∞ to +10dB

 

Processing Channel Specification
Aux / Group / Matrix Output

S21 : Specifications

General Specifications

• 46 busses: 16 x flexi-busses Mono/Stereo (equivalent of 32 DSP busses), Stereo Master (2), Solo busses (2 stereo, 4 total), and 10 x 8 Matrix (8)
• 10 x Control Groups
• 1 x Compressor per channel and buss
• 1 x Gate per channel and buss (switchable to ducker, or compressor with side chain access)
• 16 x assignable 32 band Graphic EQs
• 8 x FX engines (reverbs, delays, w/modulation and enhancer)
• 4 x assignable DiGiTuBes
• 4 x assignable Multiband Comps
• User definable Macros
• An extremely high power headphone amplifier with 1/4 inch and mini jack socket
• 96kHz as standard
• 24 mic line inputs
• 12 analogue outs
• 2 AES I/O (mono)
• Word Clock I/O
• 1 GPI and 1 GPO
• DVI out (for an external monitor)
• 2 DMI Card slots (up to 64 I/O per slot)
• 2 Ethernet connections for Networking
• 2 x 24 segment master/solo meters
• Touch sensitive rotaries with integrated switch & HTL
• 2 x multi-touch screens
• 21 x touch sensitive moving faders
• 4 x layers of banks of 10 faders
• Customisable bank and channel layout
• Snapshots
• Integrated USB2 Audio I/O interface for recording and playback of up to 48 channels 40 x Input flex-channels Mono/Stereo (equivalent of 80 DSP channels)

 

Audio Specification

• Sample Rate 48kHz, 96kHz
• Processing Delay 2ms Typical @ 48k(60 Stereo Channels, Stage
• Input Through L-R Buss to Stage Output) 1.1ms @ 96kHz
• Internal Processing Up to 40-bit, Floating Point
• A>D & D>A 24-bit Converter Bit Depth
• Frequency Response +/- 0.6dB (20Hz – 20kHz)
• THD <0.05% @ Unity Gain, 10dB Input @ 1kHz
• Channel Seperation Better Than 90dB (40Hz – 15kHz)
• Residual Output <90dBu Typical
• Noise (20Hz – 20kHz)
• Microphone Input Better Than -126dB Equivalent Noise
• Maximum Output Level +22dBu
• Maximum Input Level +22dBu

 

Processing Channel Specification
Input Channel

• Input Name User-Defined
• Channel Selection Mono / Stereo
• Input Routing Main Input
• Analogue Gain -20 to +60dB
• Phase Normal / Reverse
• Digital Trim 40 to +40dB
• Delay 0 – 682ms
• DiGiTuBe Drive 0.01 – 50.0
• Bias 0 – 6
• LPF 20 – 20kHz, 24dB/Oct
• HPF 20 – 20kHz, 24dB/Oct
• Insert A (Pre EQ/Dyn) On/Off
• Equalisation 4 Band EQ: Parametric or Dynamic (Low/Lowshelf, Lower-Mid/Lowshelf, Upper-Mid/
  Hishelf, Hi/Hishelf)
  On/Off
  Freq; 20 – 20kHz
  Gain; +/- 18dB
  Q: 0.1 -20 (Parametric) / 0.10-0.90 (Shelf)
• Dynamics 1 Single or 4 x Multiband (3-Band)
  Compressor On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 5ms – 5s
  Ratio; 1:1 – 50:1
  Gain; 0 to +40dB
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  Knee : Hard, Med, Soft
• Dynamics 2 On/Off
  Gate / Ducker Threshold; -60 – 0dB
  Attack; 50us – 100ms
  Hold; 2ms – 2s
  Release; 5ms – 5s
  Range; 0 – 90dB
  Key; Any Source
  Key Listen
  Freq/Width; 20 – 20kHz
  Compressor On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 5ms – 5s
  Ratio; 1:1 – 50:1
  Gain; 0 to +40dB
  Link; Any Channel / Buss
  S/C Source : Any Source
  S/C Listen : On/Off
  S/C Filter Freq/Width: 20Hz – 20kHz
• Insert B (Post EQ/Dyn) On/Off
• Mute Channel Mute
• Solo Solo Buss 1 / Solo Buss 2 / Both,
• Channel Safe Socket Properties, Input Route, Mono/Stereo, Label, Filters, Trim, Delay, Tube, Insert A, EQ, Dyn1, Dyn2, Insert B, Aux, Group Assigns, Pan, Fade, Mute, Direct Outs, Full Safe
• Output Routing Buss,
• Insert A, Insert B,
• Direct: Post-Fade
• Fader 100mm Motorised Fader ∞ to +10dB

 

Processing Channel Specification
Aux / Group / Matrix Output

• Name User-Defined
• Phase Normal / Reverse
• Digital Trim -40 to +40dB
• Delay 0 – 682ms
• DiGiTuBe Drive 0.01 – 50.0 Bias 0 – 6
• LPF 20 – 20kHz, 24dB / Oct
• HPF 20 – 20kHz, 24dB / Oct 
• Insert A (Pre EQ/Dyn) On/Off
• Equalisation 4 Band EQ: Parametric or Dynamic (Low/Lowshelf, Lower-Mid/Lowshelf, Upper-Mid/Hishelf, Hi/Hishelf)
  On/Off
  Freq; 20 – 20kHz
  Gain; +/- 18dB
  Q: 0.1 -20 (Parametric) / 0.10-0.90 (Shelf)
• Dynamics 1 Single or 4 x Multiband (3-band)
  Compressor On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 5ms – 5s
  Ratio; 1:1 – 50:1
  Gain; 0 to +40dB
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  Knee : Hard, Med, Soft
• Gate / Ducker Threshold; -60 – 0dB
  Attack; 50us – 100ms
  Hold; 2ms – 2s
  Release; 5ms – 5s
  Range; 0 – 90dB
  Key; Any Source
  Key Listen
  Freq/Width; 20 – 20kHz
  Compressor On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 5ms – 5s
  Ratio; 1:1 – 50:1
  Gain; 0 to +40dB
  Link; Any Channel/Buss
  S/C Source : Any source
  S/C Listen : On/Off
  S/C Filter Freq/Width: 20Hz – 20kHz
• Insert B (Post EQ/Dyn) On/Off
• Mute Channel Mute
• Solo Solo Buss 1 / Solo Buss 2 / Both,
• Channel Safe Mono/Stereo, Bus Mode, Label, Filters, Trim, Delay, Tube, Insert A, EQ, Dyn1, Dyn2, Insert B, Group Assigns, Fade, Mute, Direct Outs,
  Full Safe
• Output Routing Outputs, Insert A, Insert B
• Fader 100mm Motorised Fader ∞ to + 10dB

Caractéristiques techniques

• Plage de fréquences
  516 … 558 MHz / Allemagne
  626 … 698 MHz / Allemagne
  718 … 790 MHz / para Alemania
  790 … 865 MHz / para Alemania
  558 … 626 MHz / Allemagne
  606 … 678 MHz / UK
  516 … 558 MHz
  626 … 698 MHz
  718 … 790 MHz
  790 … 865 MHz
  558 … 626 MHz
• Dimensions   82 x 64 x 24 mm
• Préréglages    nmax. 32
• Réponse en fréquence   25 – 15000 Hz
• Connecteur mâle    3,5 mm Jack
• Poids   200 g
• Rapport signal/bruit (S/B)   > 90 dB(A)
• Gamme de fréquences HF    516 … 865 MHz
• Bande passante commutable    max. 75 MHz
• Autonomie   4 – 6 h
• Modulation   FM, MPX-stereo
• Fréquences porteuses   max. 3000
• Seuil de blocage réception   off, 5 … 25 dBμV pas de 2 dB
• Puissance à la sortie audio   100 mW @32 Ω
• Tension de fonctionnement (autonome)   2 x 1,5V AA