Dje-amp 1000

1380,00 HT

Ampli DSP 4in 4out Djeconcept
Référence : Dje-amp 1000

Catégorie :

Description

Dje-amp 1000 Spécifications

Number of channels 4 inputs 4 outputs
Output power Single channel mode : 4Ω = 2000w; 8Ω = 1000w; 16Ω = 600w
Bridge: 8Ω = 3000w; 16Ω = 2000w
Max output voltage / current 153 volts peak / 54 Amperes peak
AC Main Power
POWER SUPPLY Universal, regulated switch mode with PFC
Nominal power requirement 100-240 V ±10%, 50 hz
Operating voltage 90 V – 264 V
THERMAL
Operating temperature range 0° – 45° C – 32° – 113° F
Thermal dissipation 115 volts & 230 volts
1/8 of max output power @ 4 Ω 621 BTU/h 156.0 kcal/h
1/4 of max output power @ 4 Ω 1154 BTU/h 290 kcal/h
AUDIO
Gain 32 db 38db parametrable
input sensivity 1,6V /6 dbU 1,3V /4,5 dbU
Max input level
Frequency response 20 Hz – 20 kHz (±0.5 dB) @ 1 W, 8 Ω
S/N ratio > 112 dB (20 Hz – 20 kHz, A weighted)
Crosstalk separation > 70 dB @ 1kHz
THD+N < 0,005 % from 0,1W to full power
IMD SMPTE < 0,005 % from 0,1W to full power / DIM100 < 0,001% from 0,1W to full power
Input impedance 10 kΩ balanced
Slew rate 50 V/µs @ 8 Ω, input filter bypassed
Damping factor > 1000 @ 100 Hz
DSP
DSP architecture Analog Devices SigmaDSP® 50 MIPS
AD Converter Dual 24 bit @ 48 kHz tandem architecture
DA Converter Dual 24 bit @ 48 kHz tandem architecture
Internal precision 28 bit data path with 56 bit inner processing
Latency 1 ms fixed latency architecture
Input equalizer Parametric, hi/lo shelving, band pass, band stop, all pass
Output equalizer Custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
Crossover Butterworth, Linkwitz-Riley, Bessel or arbitrary asimmetric: 6 dB/oct to 48 dB/oct (IIR), linear phase (FIR), hybrid (FIR-IIR)
Delay Up to 170 ms output delay for time alignment
Limiters Peak limiter, RMS limiter, frequency dependent RMS limiter
RS-485 protocol or DSP Programming Board
CONSTRUCTION
Format Boitier rack 19 pouces ou boitier Alu usiné

Voir aussi