Description
RAM audio W9000 – Spécifications
Continuos Power | V6000 | V9000 | V12000 | V9004 | V9044 | V12004 | V12044 |
2 ohm | 2x3025W | 2x4400W | 2x5900W | 4x2260W | – | 4x3025W | – |
4 ohm | 2x1600W | 2x2300W | 2x3100W | 4x1150W | 4x2200W | 4x1600W | 4x2950W |
8 ohm | 2x820W | 2x1200W | 2x1600W | 4x600W | 4x1150W | 4x820W | 4x1550W |
Puente 4 ohm | 1x6050W | 1x8800W | 1x11800W | 2x4520W | – | 2x6050W | – |
Puente 8 ohm | 1x3200W | 1x4600W | 1x6200W | 2x2300W | 2x4400W | 2x3200W | 2x5900W |
High Z | |||||||
70Vrms / 100Vpeak | – | – | – | 4x2260W | – | – | – |
100Vrms / 140Vpeak | – | 2x4400W | 2x5900W | – | 4x2200W | – | 4x2950W |
• Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz
• Phase Response (@1W 20Hz-20kHz): ±15deg
• Total Harmonic Distortion (20Hz-20kHz): <0.05%
• Intermodulation Distortion (SMPTE): <0.05%
• Damping Factor (@8ohm): >1000
• Crosstalk (20Hz-1kHz): >80dB
• Voltage Gain: 26dB to 38dB (0.5dB steps)
• Sensitivity (rated power 26/32/38dB Gain): 6000: 4.0/2.0/1.1 V 9000: 4.9/2.5/1.2 V 12000: 5.7/2.8/1.4 V
9004: 3.5/1.7/0.9 V 9044: 4.8/2.4/1.2 V 12004: 4.1/2.0/1.0 V 12044: 5.6/2.8/1.4 V
• Signal to noise Ratio (20Hz-20kHz): 6000: 113dB 9000: 115dB 12000: 116dB
9004: 112dB 9044: 115dB 12004: 113dB 12044: 116dB
• Required AC Mains:
Operating Voltage (50Hz-60Hz): 170V-265V AC
Power On Idling (@230V): 0.5 A
1/8 rated power (@230V min. Z): 6000: 7 A 9000: 10 A 12000: 13 A 9004: 11 A 9044: 10 A 12004: 14 A 12044: 13 A
• Dimensions (WxHxD): 483×88.9×460 mm – 19×3.5×18.1 inches
• Weight (Net): 6000: 10kg-22.1Lbs 9000/12000/9004/9044/12004/12044: 12kg-26.5Lbs
• Protections: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, Mains Overvoltage, ICL™, PMS™, SSP™ and FCM™
Voir aussi
- Support
- Option module DSP
- Besoin d’un processeurs
- La diffusion
- Ergonomie avec les Djeracks + patchs et réseau